Titan Industrial Roller Shutters
The proven, durable performer
From large door openings to window protection, Titan Industrial Roller Shutters are strong and renowned for reliability – the workhorse shutter! Steel lath and plenty of options for colour, operation and different applications are the platform for an economical, long lasting shutter solution.
Tough, durable & dependable security
The steel construction uses heavy duty components, many of which are galvanised, that can be part or fully powder coated to suit building aesthetics. The thick steel gauge and the options for guides and endlocks ensure each shutter suited to its intended use and the aspect of the door.
Economical & adaptable shutter solution
With decades of experience in shutter manufacture, the Titan industrial roller shutter is optimised to provide excellent engineering and suitability for uses across all sectors. Such broad application is also met with economy that doesn’t sacrifice capability and performance.
CURTAIN OPTIONS
50 mm flat or 3” concave interlocking laths
Titan industrial roller shutter curtains are available in 50 mm flat or 76mm (3”) concave interlocking laths. Strength is enhanced with curtains held together by either nylon, pressed steel or cast steel endlocks with the addition of wind endlocks for doors subject to wind pressures or above a pre-determined size.
50mm flat lath
Shown with nylon endlocks and 'T' section bottom rail.
76mm (3') concave lath
Shown internally fitted with the convex face to the front of the shutter. Lath powder coated in RAL 5002 Ultramarine Blue.
COMPARISON
50mm flat (top left) vs 76mm (3") concave lath.
Lath face
76mm curved lath – Externally mounted shutters will show the concave face of the lath, internally mounted will show the convex face.
50mm flat lath – Externally and internally mounted shutters will show a flat face of the lath.
COLOURS
All of Titan roller shutter doors can be supplied in a galvanised finish or part or fully powder coated to almost any standard RAL or BS number subject to availability. A popular option is to have one face of the curtain, usually the external face, finished in Plastisol HPS200 from a wide range of colours
Galvanised
Standard finish
RAL or BS colours
Powder coated
Plastisol HPS200
Coated to the external face
KEY FEATURES - TITAN ROLLER SHUTTERS
Roller Barrel assembly
Dependent on the type and size of the door, Titan’s roller barrel assembly will be either sprung or un-sprung and manufactured from to a diameter to suit the door, with deflection kept to a minimum.
Endplates
Door-specific laser cut endplates of varying sizes and thicknesses to suit the type and size of the door without the “Pepperpot” endplates of other suppliers! Finished in Grey primer endplates can also be either electro-zinc plated or powder coated to suit the rest of the door. Shown here with double reduction handchain.
Bottom Rail
Fitted to the bottom of the curtains to seal the door to the floor is a galvanised steel bottom rail in either a “T” or an “L” shape section. This can also have a safety edge or a bottom rubber door seal fitted to it. T section with rubber seal shown.
Guide Channels
Fitter friendly, pre-drilled continuous galvanised mild steel channel sections of varying depths, dependant on size and specification of the door, are mounted on galvanised steel angles to captivate the roller shutter door curtain during operation.
This is known as a “flag-angle” arrangement which ensures that the doors are fitted square.
Safety Brake Mechanism / Anti-fall back device
All of Titan roller shutter doors, apart from push up pull down operated, are supplied with an anti-fall back safety brake mechanism, either separate or enclosed within the motor to ensure that the door cannot fall more than 300 mm or out of balance for less than 200 newtons to comply with the latest regulations.
OPERATION
Manual Operation
Push Up / Pull Down
An economic roller shutter door that is ideal for smaller apertures where the door will be opened / closed a limited number of times per day, typically over a doorway entrance
The most common form of locking on the type of door is a pin lock also known as a bullet lock.
Manual Operation
Hand Chain Operated
Ideally suited to industrial applications, the curtain of the door is manually raised via a continuous haul chain, on a hand chain wheel on the end of the door or via a series of reduction gears that drives the fully sprung counter balance roller barrel assembly.
All hand chain roller shutter doors are supplied with a chain keep that holds the haul chain in position ensuring that the door cannot open.
Tube Motors or Single/Three Phase Motors
The following types of motors can be supplied with Titan industrial roller shutter doors: –
- Single phase tube motors
- Single phase in-board mounted industrial motors
- Single phase out-board mounted direct drive motors
- 3 phase flange mounted chain and sprocket driven in-board and out-board motors
- 3 phase out-board mounted direct drive motors
Motors are available from all of the largest motor manufacturers in the world, Ellard, Link Controls and GfA – Please state your preference at time of enquiry.
Extensive Applications
Large or small openings across industry and commerce are suited to the strength and security of Titan industrial roller shutters:
TITAN INDUSTRIAL Roller Shutter example installations
COMPLIANT QUALITY
Each door is also fully compliant to the machinery directive 98 / 37 / EC.
It has been mandatory for the installer of the door to “CE” mark the product to the machinery directive since January 1st 1995.
DECLARATION OF INCORPORATION
For you (the installer) to satisfy the conditions of your own technical file, a copy of our Declaration of Incorporation can be found on the specification page and in the downloads area.
Your Warranty
Titan is covered by warranties for the periods stated below, subject to terms and conditions (available on request and supplied with every door) and regular maintenance.
1 YEAR
Warranty on door components against manufacturing defect.
1 YEAR
Warranty on motor and controls excluding batteries and transmitters.
Priory is totally committed to trade supply, support and service. Get in touch to enquire about a trade account now.
We only supply to trade however, if you like our products then get in touch and we’ll put you in touch with one of our trusted suppliers.